Even at 20.5” long and 15.3” deep, the NANUK 950 makes moving heavy equipment easy.
Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience.
With NANUK’s exclusive locking and latching system, the NANUK 950 stays shut and secured until you are ready to open it. Built to organize, protect, carry and survive tough conditions.
The NANUK 950 hard case offers the maximum level of protection for all of your professional equipment.
The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, electronics, medical equipment, outdoor gear and much more!
Three soft-grip handles make this wheeled case one of the most convenient and easy-to-handle on the market. The 950's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
The NANUK 950’s ergonomic handles feature stainless steel hardware and integrated handle stays to keep the handles out of harm’s way when traveling or during shipping.
This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
- Interior (LxWxH) 20.5 × 15.3 × 10.1”
521 x 389 x 257 mm
- Exterior (LxWxH) 22.8 × 18.3 × 11.7”
579 x 465 x 297 mm
- Lid Depth 2.1" | 53 mm
- Base Depth 8.0" | 203 mm
- Internal Volume 3168 cu.in | 1.83 cu.ft | 51.9 L
- Weight (empty) 15.1 lb | 6.8 kg
- Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C)
- Material Lightweight NK-7 resin
- Max buoyancy 110.0 lb | 49.9 kg
- Padlock Holes Diameter 0.340"
- Handle height from ground 32" | 37.5"
- Airline carry-on No*
*Check with your airline carrier before travelling.
I purchased my Nanuk 950 after seeing a friends a few years back. They are just built better than any other similar products. I haven't gotten to put much wear on mine so for, however it will get its first test in the back of a semi trailer next month. As it is everything was as it should be as far as the craftsmanship...it holds everything I need to work in just about any lighting issue or fixture as well as a harness and even had space for my 17" laptop behind the lid organizer.
The one thing I wish this had was a ridged divider or shelf so I could have a small padded top section for electronics and testers while leaving the bottom open for heavier objects.
I will update after this thing sees some real use.
I like the composition of the case, however I do need to customize the padding. To improve the product perhaps there could be a fitted piece of foam padding on the bottom. Otherwise, the case is great. I use it for tools to travel and I have reduced the weight by 15 lbs.
I've worked decades in field service. My Nanuk is the best case for my tools I've ever had. The padded divider and lid organizer keep my tools and test equipment well protected and organized. Tough case with very well designed latches. Highly recommended.
I am happy with my Nanuk950. Its sturdy and quality is good. Price is right and my olive colored case is awesome
Great products! Excellent customer service.
I own about 5 cases now I want 5 more these things are muti generational gear kids can fight over them after I’m gone lol
This is my second Nanuk case and quality is top notch. Although the 950 case is slightly bigger than I wanted, it’s the closest size to the 938 I could get. But the 938 is not offered in Olive Green and wanted all my cases to match. Here’s hoping Nanuk will offer more colors on the 938.
- Interior (LxWxH)
- Interior (LxWxH)
- Exterior (LxWxH)
- Exterior (LxWxH)
- Lid Depth
- Base Depth
- 20.5 × 15.3 × 10.1”
- 521 x 389 x 257 mm
- 22.8 × 18.3 × 11.7”
- 579 x 465 x 297 mm
- 2.1" | 53 mm
- 8.0" | 203 mm
- 3168 cu.in | 1.83 cu.ft | 51.9 L
- 15.1 lb | 6.8 kg
- 20.5 × 11.3 × 7.5”
- 521 x 287 x 191 mm
- 22 × 14 × 9”
- 559 x 356 x 229 mm
- 2.1″ | 53 mm
- 5.4″ | 137 mm
- 1737 cu.in | 1.00 cu.ft | 28.5 L
- 11.6 lb | 5.2 kg
- 22 × 17 × 10.2″
- 559 x 432 x 259 mm
- 25.6 × 20 × 11.8″
- 650 x 508 x 300 mm
- 2.1″ | 53 mm
- 8.1″ | 206 mm
- 3815 cu.in | 2.2 cu.ft | 62.5 L
- 18.40 lb | 8.16 kg
Smooth & Silent rolling on any surface
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. The NANUK 950 case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
A Retractable Handle Fitted for Smalls & Talls
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button. Available on the NANUK 950 case.
PowerClaw Superior Latching System
Close with confidence. Open with ease.
Ensuring that your smaller gear stays well protected from the elements, the NANUK 950 case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
IP67 Waterproof & Dustproof
Go where no case has gone before.
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Indestructible & Lightweight NK-7 Resin
Get High-Impact Protection with a fraction of the weight.
Impact-resistant, lightweight, and armed with NK-7 resin body, the NANUK 950 protective case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Design & Colors
Stand out with a unique design and color selection.
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case. Color options range from emergency red to military olive, meaning that you can blend in or stand out, whatever the task entails.
Automatic Pressure Release Valve
Keep your case from sealing shut. Automatically.
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Guaranteed for life
NANUK cases are designed and manufactured in Canada and are tested in some of the harshest conditions, including our own backyards. Every NANUK case comes with a lifetime guaranty so that if there is ever a problem with your case it will either be repaired and returned or replaced.